Six-colour offset
In offset 6 màu
High-volume large formats with stable colour across lots, thanks to lot-based colour control and an in-line coater.
Production capacity
PRODUCTION CAPABILITIES
Modern facilities, a closed-loop process and a professional team — meeting every packaging need with consistent quality and fast delivery.
10 + Years of experience
2,000 m² Factory floor area
50 + Employees
10,000 t/month Monthly output
4 Core product lines
Printing technology
Three printing technologies under one roof
Digital printing
In kỹ thuật số
Short runs, approval proofs and variable data — no plates needed, on press within a day.
Flexo on corrugated
In flexo trên sóng
Prints directly on corrugated board — the cost-optimal route for high-volume carton orders.
“One job can run offset for volume, digital for samples and short runs, and flexo for the outer corrugated layer — without moving between plants.”
Key equipment
KEY EQUIPMENT
| Equipment | Role |
|---|---|
| Pre-press | |
| CTP platesetter | Direct-to-plate imaging — file check, imposition and plate output on site. |
| Printing & corrugating | |
| Six-colour offset press | High-volume large-format printing with in-line coater and stable colour across lots. |
| Digital press | Proofing, short runs and variable data — no plates required. |
| Corrugator line | Produces B, C, E and double-wall BC board — full control of paper grade and schedule. |
| Flexo press | Prints directly on corrugated board — ideal for high-volume carton orders. |
| Finishing | |
| Automatic die-cutter | Automatic die-cutting and stripping — clean cuts, consistent dimensions across lots. |
| Automatic laminator | Gloss or matt film lamination for surface durability and moisture resistance. |
| Automatic mounter | Mounts offset faces onto corrugated board — flat surfaces, no edge lifting. |
| Folder-gluer line | High-speed folding and gluing for straight-line and crash-lock boxes. |
| UV coater | Full or spot UV coating to highlight brand details. |
In-house pre-press — file check, imposition and plate output on site.
Lot-based colour management — colour measured and recorded per lot for repeat-order consistency.
Post-press finishing
POST-PRESS FINISHING
Six finishing operations in one plant
Lamination
Cán màng
Gloss or matt film for surface durability and moisture resistance.
UV coating
Phủ UV
Full or spot UV to highlight brand details.
Auto die-cutting
Bế tự động
Automatic die-cutting and stripping — clean, consistent cuts.
Auto mounting
Bồi tự động
Offset faces mounted onto board — flat, no edge lifting.
Folder-gluer
Gấp dán
High-speed gluing for straight-line and crash-lock boxes.
Packing & storage
Đóng kiện – kho
Counted, packed and palletised to delivery requirements.
Production capacity
An integrated production chain
From paper reel to finished pallet — under one roof
- 01
Paper & board supply Gramage & moisture checked at intake - 02
Offset – digital – flexo Three technologies under one roof - 03
Post-press finishing Die-cut, laminate, mount, glue, UV - 04
Warehousing & delivery Packed & palletised to order
Process & quality
Seven steps from brief to delivery
Every job follows the same seven steps. Three of them are hold points — structure approval, print proof approval and first-lot inspection — so deviations are caught on the floor, not at delivery.
- 1 Brief & inquiry
- 2 Structural design
- 3 Sample approval
- 4 Pre-press & plating
- 5 Production printing
- 6 Finishing & QC
- 7 Packing & delivery
KCS / QC
Quality control
-
Incoming material check — gramage, moisture and board compression strength verified before production.
-
First-sheet approval — checked against the signed proof and retained as the shift reference.
-
Colour measured per lot — independent of shift or operator.
-
Dimension & die-line check — against the approved structural drawing.
-
Final inspection before packing — count, codes, glue seams and surface.
Need a packaging quote?
Send us your product, quantity and dimensions — we reply within 24 working hours.